Construction for Sheringham Wind Farm12/03/2010 |
| Construction work on the Sheringham Shoal Offshore Wind Farm site started last week with the arrival of the 164m Nordnes vessel, which will position rocks at selected foundation locations in preparation for the start of the installation of the giant monopile structures next month. Using a precision technique, she will place 2-9" filter rocks in a ‘donut' shape around the site of 77 of the 90 foundation locations to reduce the likelihood of scour and protect the cables when they are installed. |
|
Scour protection is needed for wind turbine foundations, as well as other types of marine structures, due to changes in water flow patterns that may cause a lowering of the seabed immediately surrounding them. Dutch company Van Oord has been contracted to carry out the filter layer work which will be the first stage of a two phase process. In the second phase, larger rocks will be placed in the same pattern to act as armour to the filter layer after all the foundations have been installed. The appointment of the contractor to undertake the armour layer works has yet to be decided.
This work will prepare the site for the arrival of the first foundation for installation at the end of next month. Each foundation is made to individual specifications and will be between 50 and 55 metres long, with a 4.2-5.2m diameter and weighing from 400 to 600 tonnes.
The Nordnes will be on site at Sheringham Shoal, between 17 and 22km off the coast of North Norfolk, until 18th March when it will return to Norway to collect its second load of rock. It will arrive back in the Greater Wash on 22thMarch, working until 30th March. The final rock placement for the Filter Layer work will be completed around early June 2010.
The Sheringham Shoal Offshore Wind Farm is owned equally by Statoil and Statkraft through the joint venture company Scira Offshore Energy Limited. Statoil is the operator for the project during the development phase. Scira will be the operator of the wind farm.
Read more about: Construction vessel Offshore Supplier: Statoil UK Award for Brazilian Hydrographic Paper Demonstrating "Deeper Understanding" First Real-Time Seafloor Earthquake Observatory Theme Hydrography Day 2012 International Cooperation Finistere and Mediterranean Bathymetric Lidar Surveys Precise Positioning For BP Vessels DP Inertial Navigation System for Drillship Plug-and-work Protocol Adopted Simulator Models Complex Sea Currents Monitoring the Shipwrecked Concordia 
Comments (0): |
| News |
| News > Construction for Sheringham Wind Farm |
|
Interactive |
Hydrographic Survey for Riverbed Erosion |
U.S. Geological Survey were out on the Missouri River at Williston, North Dakota, USA, performing a hydrographic survey to monitor the state of riverbed erosion. They were using a multibeam echo sounder which transmits sound energy and analyzes the return signal (echo) that has bounced off the riverbed or other objects. Multibeam sonars emit sound waves from directly beneath a ship's hull to produce fan-shaped coverage of the riverbed.
|
| Last 5 items: |
| Hydrographic Survey for Riverbed Erosion |
| Introduction to GEBCO |
| MCA on Surveying the British Coast |
| Surveying in the Port of London |
| Venessa O'Connell on Hydrography |
