2D and 3D Ocean Bottom Node Seismic Survey for Total07/10/2013
|Seabed Geosolutions, headquartered in The Netherlands, has secured a two-year contract with Total E&P for its Ocean Bottom Node seismic data acquisition technology. The contract utilises a ‘call-out’ mechanism for each acquisition survey with the option to extend the contract for an additional 24 months. The initial work programme consists of approximately 5 months of 3D and 2D surveys and will commence in the UK Sector of the North Sea in the fourth quarter of 2013 upon completion of a current West Africa survey.|
The multiple survey areas will be acquired with Seabed Geosolutions’ deepwater Trilobit technology and robotic modularised handling equipment. This seismic system is a proprietary autonomous node technology deployed using a ROV (remotely operated vehicle). The survey acquisition timing will allow Seabed Geosolutions flexibility to secure other projects in the North Sea or elsewhere.
Seabed Geosolutions was formed early 2013 as the seismic seabed joint venture of Fugro and CGG. It collects geophysical data on the seabed through an array of imaging technologies for energy companies, with a focus on the development and production phases of oil and gas fields.
comments powered by Disqus
Read more about:
ROV Current Seismic data
Supplier: Seabed Geosolutions
Ocean Energy in Europe Could Supply 115 Million Homes by 2050
Video Introducing EMODnet
Monitoring Network for Scottish Ports
GIS Software for Underwater Survey
Europe’s Deepest Glider to be Developed
25 Years Scientific Service for RV Heincke - and Counting
R/V Aranda Turns into Next Generation Marine Research
World ECDIS Day
HELCOM Contributes to Report on Oceans and the Law of the Sea
Oceans of Colour
How to Use QPS' Qimera to Validate Processed Point Files
QPS Qimera processing software has been released earlier this year. To demonstrate the capabilities, this video shows how to load processed point files into a Qimera Project. It explains what processed point files are; how to specify the coordinate system of the project and the source files; how to create a Dynamic Surface from processed point files and how to change the dynamic surface and adjust the colour map to aid data editing and validation.