| Brand |
Bluefin Robotics Corporation |
| Product |
Deep Bluefin-12 |
| Vehicle type |
Free-flooded, torpedo-style AUV |
| Total number of AUVs built |
N/A |
| Commercial options |
N/A |
| Weight of AUV in air (kg) |
260 |
| Maximum payload (kg) |
Variable, free-flooded system |
| Freight weight |
Vehicle case (qty 4): 100kg each; battery case (qty 5): 21kg each; plus spares and support equipment |
| Dimensions (l x w x h) (m) |
4.32 x 0.32 x 0.32 |
| Maximum depth rating (m) |
1500 |
| Number of thrusters: directional/lateral control |
1 |
| Hover capabilities (Y/N) |
N |
| Minimum turning radius (m) |
4.32 (length of vehicle) |
| Type of launch & recovery system (LARS) used, how the AUV is recovered |
A-frame & winch, crane, ramp |
| Average speed; maximum speed (knots) |
3; 5 |
| AUV crew size |
2 |
| Number of surface computers required for operation |
1 |
| Storage space requirements (size) |
Variable |
| Other requirements |
Bluefin Operator Tool Suite (GUI) (standard), training course (standard) |
| Standard navigation sensors |
INS, USBL, pressure, sound velocity |
| Optional navigation sensors |
IMU, GPS, DVL and compass, pressure |
| If an INS is installed, navigation sensors used to update position during a dive |
All others |
| Standard payload sensors |
Field-swappable payload sections: payload 1: side-scan sonar; payload 2: high-resolution 1.4 megapixel camera (8 frames/second) |
| Optional payload sensors |
Buried object scanning sonar, real-time gradiometer, CTD, SAS, various other sensors, sonars and payloads |
| Total energy content of battery (kWh) |
7.5 |
| Nominal battery power (W) |
250 |
| Endurance at nominal power (hours) |
30 hours @ 3 knots |
| Battery modules can be swapped (Y/N) |
Y |
| Recharge time from empty (hours) |
6 |
| Acoustic telemetry is fitted (Y/N); baud rate (bits per second) |
Y |
| Radio telemetry is fitted (Y/N); baud rate (bits per second) |
Y |
| Ethernet connection for update; maximum speed |
100Mb/s |
| Type of data sent to the surface |
Detailed health & status |
| Control parameters sent to the AUV |
Mission abort, mission stop, hardware kill, position updates, limited redirection |
| Emergency recovery procedure in the event of a total system failure |
Dropweight, acoustic locator & RDF |
| Current AUV applications |
Deep water survey, pipeline and engineering survey, ocean floor mapping, environmental monitoring, MCM, ISR, port and harbour security, REA, oceanography, fishery assessment, archaeology, research and development platform |
| Further information |
Expand your payload flexibility with the Bluefin-12’s modular design. Quickly exchange sensor payloads for different missions, even at sea. Extended depth options allow for even the most demanding applications while retaining a small form factor |
