| Brand |
Teledyne Odom Hydrographic |
| Product Name |
ES3/ES3M-XX |
| Date of first release |
2008 |
| Hull/ Bow/ Side/ ROV/AUV Mounted, towed |
Hull/Bow/Side/Towed |
| Retractable Y/N |
Yes |
| Diameter, height (cm) |
162mm L x 117mm H x 92mm W |
| Weight, without cable, per module (kg) |
Stainless Steel Model 8 kg Delrin Model 2 kg |
| Power requirements |
24 VDC less than 25 Watts |
| Type of system |
Beam Steered |
| Bottom Detection Method |
Amplitude |
| Frequency Range |
240 kHz |
| Depth Range, depth resolution |
60 m max depth range, resolution 0.02% of range |
| Max. Slant Range |
100 m |
| Max. Swath (function of depth) |
210 m |
| Samples per sweep, samples per second |
14 Hz range dependent |
| Beam width (acrossx along track [deg]) |
3° x 120° |
| At max. horizontal range (m) |
0.2x0.5/ 0.9x2.6 |
| Smallest identifiable cube (m3) |
0.7x1.0/ 3.4x5.2 |
| Max swath |
0.5m/4m |
| Are footprints equally spaced? |
30/100 |
| Number of SSS-points per sweep |
Yes |
| Calculated statistical system accuracy (cm RMS) |
0.2 |
| System Accuracy in relation to IHO S44-4, meets S44 order |
Meets IHO Special Order* |
| Max. allowable survey speed to allow for this accuracy (knots) |
8 |
| System applies ray bending corrections in real time |
No |
| System is capable of collecting and integrating the SV-profile in real time during data collection |
No |
| Motion sensors compatible to the system |
All capable of outputting TSS1 string |
| Dynamic accuracy required from MRU (degrees) |
0.25° roll and pitch |
| Possible interfaces to the processing unit |
Ethernet |
| Mean time before failure (hrs) |
No statistical data available |
| Mean time to repair (hrs) |
<1hr |
| Online access to bathymetric data during collection |
Yes |
| If yes, by which means? |
Raw point files are exported in real-time |
| Additional remarks |
IHO Special Order requires 3 data points per cell. |
| Units sold |
100 |
